For professional electricians, ensuring safety while delivering their duties is of paramount importance.
Since there are a lot of tools that they carry, it’s quite normal that they keep switching and swapping the tools. If the tool which they require is kept at just an arm’s length, it becomes easier for the electrician to reach out to it, grab it, get the work done, and be done with it.
On the other hand, if he has to stretch his arms and legs in order to reach out to the hand tools, then the work becomes even more hectic. Here’s a teaser, we are going to unravel some of the Best Electrician Tool Belts which you can buy in 2020 but let’s focus on the information which we are about to share with you.
Problem With the Tool Bags – Solution? Electrician Tool Belts!
Before we directly plunge into the discussion, here is the reason which answers the question that why do we need an electrician tool belt when we already have a tool bag?
Suppose you are working in such a place that is too compact for your tool bag, can you carry along your tool bag there? Do remember the fact that the working environments in which an electrician or a plumber usually works, aren’t always roomy rather these environments are constricted. Always tagging along your tool bag won’t do you any good. Rather it will cause problems for you in places like rooftops, ceilings, cabinets, and so on.
A good quality tool belt, on the other hand, will let you complete your job in an orderly manner without causing any inconvenience. With a tool belt, you no longer have to come down to get the required tool and climb back up the stairs to finish the job because the tool you need will be hanging right across your waist.
The problem with a toolbox or electrician tool bags is, these items don’t ensure ease of access while doing critical jobs that are performed by electricians or plumbers. On the other hand, a tool belt is a such equipment that becomes a part of your attire wherever and whenever you decide to go to work irrespective of the working environment.
Relevant: Best Tool Bags for Plumbers 2021
For this reason, we have compiled the buying guide which you can read in order to get your hands on a quality tool belt. Let’s proceed towards getting to know some really useful information that you will be needing while selecting a good belt for an electrician.
Ultimate Buying Guide
Before we list out the best tool belts for electricians, let’s have a quick introduction of what a tool belt actually is and how does it work?
An electrician tool belt is an equipment specifically designed to hold a majority of the tools which an electrician needs while performing the job. All you need to do is to buy the tool belt, wear it around your waist, and stuff the necessary power tools in it and go to the work site anytime you want to. It is no different from a conventional belt which you wear in your pants, but with extra pockets.
The reason why we are focusing on you reading the whole buying guide is the fact that the moment you decide to go for a tool belt, you will see hundreds of these items listed on several stores. Every single brand out there will advertise its products to the best ones but in reality, quite a few are worth considering.
We care about your hard-earned money and we don’t want your money to go into the wrong hands. For this reason, we have compiled a list that features some of the tool belts for electricians along with their reviews and pros and cons so that nobody can rip you off.
Types of Tool Belts for Electricians
Let’s take a look at the tool belt types. These belts are available in two major forms. The reason is that every electrician wants to get one depending on the needs of the working environment.
This type of tool belt is the basic version that sits around your waist and has pockets with tools coming off of it. It works best for construction workers. If you are one of these workers, try getting your hands on a comparatively thicker tool belt because it will be more comfortable and won’t leave stretch marks on your waist when you will be wearing one.
Many electricians think of the harness tool belt as the best one. They give several reasons for it. One such reason is, this belt equally divides the weight into shoulders, hips, and waist, unlike the standard belt whose weight is distributed on hips only.
The harness electrician tool belt is designed in such a way that it is suspended with elastic suspenders which make it easier for the workers to wear it around even when they are not working or taking a break. It is convenient to wear and easy to carry around.
The fact that the material plays a vital role in the durability of these belts, is also valid. Mostly, you will find the belts in several materials but if you want to invest your money in the right way, do keep your options limited to the belts which are made with the following materials:
Picking out a tool belt for electricians that has been made using quality is leather, is a treat that many of you will get to know only after you buy one. The grade of the leather also plays a major role but that’s a whole other debate which we are not getting into. You need to pick that belt that has been made with the top-most skin layer of leather because that’s the only leather grade that will grant durability to the end product.
If you need more cushioned material in the tool belt, go for the one which has been made using the polyester. It’s basically a synthetic material that lends softness to the end product. It also lessens the weight of the tool belt which in turn brings a massive cut in the price of the tool belt. Don’t get worried about the quality and durability since it won’t bring the quality down. A tool belt made of polyester will be water-resistant and comfy.
A tool belt made of nylon will exhibit the same amount of behavior as a belt made from polyester will, only it will take a little more time for the changes to take place. Although the belt will exhibit issues like wear and tear but, do keep in mind that a nylon made tool belt will be stronger than a polyester made belt and its price will be lesser than the rest of its counterparts.
When you visit any store which advertises tool belts, don’t simply fall for the charming marketing tactics which aim to woo you into buying second or third-class material.
11 Best Electrician Tool Belts Reviews In 2021
Here’s the list of the top products which you can buy right after reading their unbiased reviews & pros & cons.
|Belt Names||No. of Pockets||Belt Size|
|1||Gatorback B240 Electrician Heavy-Duty Ventilated Work Belt||18 Pockets||Large|
|2||Occidental Leather 5590 M Electricians Set||37 Pockets||Medium|
|3||TradeGear MEDIUM 31-35″ Electrician’s Belt & Bag Combo||27 Pockets||Medium|
|4||Custom Leathercraft 1608 Electricians Comfort Lift Combo Tool Belt||28 Pockets||Medium|
|5||Gatorback Electricians Tool Belt & Drill Holster||27 Pockets||Medium|
|6||FASITE PTN012 Electrical Maintenance Tool Belt||32 Pockets||Small|
|7||TradeGear Heavy Duty Electricians Tool Belt||27 Pockets||Medium|
|8||DEWALT DG5103 Small Durable Electricians Tool Belt||18 Pockets||Small|
|9||McGuire-Nicholas 526-CC Brown Professional Electricians Pouch||12 Pockets||Small|
|10||Occidental Leather 5500 Electricians Tool Pouch||15 Pockets||Small|
|11||Klein Tools 5240 Maintenance Tool Pouch||9 Pockets||Small|
1. Gatorback B240 Electricians Combo Heavy-Duty Tool Belt
An electrician’s job isn’t easy. You need the right tools to make work easy and must not ignore the safety element. Gatorback B240 tool belt is one of your companions that allows you to climb the ladder safely and access the tool without any hassle. Those who perform heavy-duty tasks can organize their tools and keep the necessary tools with them at high altitudes.
Gatorback electrician’s combo belt is one of the best due to the exceptional benefits it offers. Sturdy 1250 DuraTek nylon is used in construction that makes it extra durable and extra protective. 18 pockets are made to keep the maximum number of tools and all of the pockets are of different sizes. This helps you carry both small and bigger tools easily. However, it’s a lightweight belt that never discomforts you even when you load heavy tools in it.
It would be unjust to not mention the amazing back support system of the Gatorback electrician combo that is designed with padded foam to deliver comfort, stability, and back support during work. The breathable back system assists you during work by not causing any sweating and rashes type issues.
The strength and stability of the bag are unquestionable as heavy-duty metal rivet and Bar-Tack stitching are the prominent features of this belt. Other than that, it comes with a maximum comfortability handle so you can wear and remove it easily.
- Product Dimensions: 22.52x 14.49x 5.98 inches
- Weight: 5.34 pounds
- Size: Large 36”-40” waist
- Material: Sturdy 1250 DuraTek nylon
- Pockets: 18
- Box shape design that never sags
- Highly durable and sturdy material used in construction
- Comfortable back system
- Easy to carry handles
- Breathable and padded belt
- 18 pockets and a tape chain
- The belt never comes with padded suspenders and you have to buy it separately
2. Occidental Leather 5590SM Commercial Electricians Set
The Occidental Leather tool belt is popular for its durable and reliable products. One of such products is 5590 M electrician’s tool belt set that one must not forget to buy if he is a professional electrician. The belt never disappoints you and gives you splendid comfort and ease while working on a hectic project.
The best thing about this belt is the convenience it offers to the wearer. The belt fits every waist size and comes with different departments and pockets. Due to the multiple pockets, it offers enough space to keep tools inside the belt and provides quick access to them. From small nails and screws to bigger tools like hammers, you can keep them in the belt and take them anywhere with you.
The most important feature of an electrician’s belt is its durability and Occidental Leather never disappoints you in this regard. The strong leather material never breaks or damages easily and naturally molds with the shape of the tool. That’s why it’s known as one of the best quality electrician tool belts.
The belt comes with buckles and clasps which provide enough strength and stability to your waist and let you work with a sense of security. The sturdy and strong material ensures a non-slippery grip and minimizes accident chances. You need some time to get familiar with this belt is the only drawback of the belt.
- Item Dimensions: 8x 6.75x 2.75 inches
- Item weight: 6 pounds
- Material: Leather
- Size: Medium-sized bag
- It’s a strong reliable and powerful belt
- Medium size bag comes with multiple pockets
- Equipped with clasps and buckles
- Easy to wear for longer hours
- Comfortable for waist and skin
- The design of the bag is a bit complex and you need some time to understand the perks of the belt completely.
3. TradeGear Electricians Belt & Tool Bag Combo
This is another great option for electricians to ensure safety at the workplace. It’s not good for only electricians but also recommended for other professionals such as carpenters, tradesmen, and mechanics. High-quality DuraTek nylon material is used in the construction of the belt which makes it the hardest thing to get damaged. You can rely on its strength and use it at work without fearing the loss of your tools.
There is ample space to keep tools in the bag as it comes with twenty-seven compartments which are designed according to the needs of an electrician. When having this bag, disordered and improperly organized tools are the last thing you can expect. Keep and protect your tools the way they deserve to be kept as they are your asset and a source of your bread and butter.
How can we forget the comfort you get due to the breath-ability factor, air-channel ventilation prevents excess sweating and lets you focus on work completely. Other than that, it’s not heavy unlike its competitors because it’s made of the lightweight material nylon that allows you to add more tools in the bag and keep them with you.
No doubt, it’s one of the best electrician belts but the nylon material never adapts the shape of a tool like a leather belt. This is the only drawback of the belt which often causes inconvenience in holding the tools.
- Item Dimensions: 12x 4.4x 2.4 inches
- Item weight: 15.2 ounces
- Pockets: 27
- Material: DuraTek nylon
- Size: Suspenders
- Contoured back support to give comfort and ease
- Highly durable and powerful belt
- Twenty-seven pockets to give ample space
- Breathable and well-ventilation system
- Never gets damaged easily
- Nylon material never conform to the shape of tools easily
4. CLC Custom Leathercraft 1608 Electricians Combo Tool Belt
This unique shaped electrician’s tool belt can prove your best workplace companion by providing you maximum ease and safety. It’s designed for weight distribution evenly and maintain a balance. This feature helps you protect your back and hips from excess strain and pain and one of many reasons which makes it one of the best tool belts.
The pouches of the belt are professionally designed to prevent tools from falling down and give easy access to every tool. Hard and sturdy material, i.e. polyester fabric is used in the manufacturing of the belt that makes it durable against severe weather situations, scratches, and damage. Multiple pockets let you keep things effortlessly while there is a separate holder for the drill & drill bit (s) to ensure safety.
Another amazing feature of the custom leathercraft is its easy adjusting. It fits users who have waists size between 29 inches to 46 inches that makes it the first choice for companies where different employees use the same equipment.
Talking about the electricians comfort lift combo tool, there is a 3-inch wide padded belt that gives you strength and ease and never causes any inconvenience. Other than the hammer holders, you also find a separate measure tape strap and a tool snap while the number of pockets in this belt are more than 28.
- Item Dimensions: 22.6x 13.6x 6 inches
- Item Weight: 4.34 pounds
- Material: Polyester fabric
- Number of Pockets: 28
- Enough space due to 28 pockets
- Zipped pockets prevent tools from falling out
- Reliable and hard to damage the belt
- Good enough to keep a number of tools in it
- Highly convenient design to give quick access
- Lightweight and easy to carry
- The material isn’t very long-lasting as compared to leather and other materials used by competitors
5. Gatorback B240 Electricians Tool Belt & Drill Holster
This bag is unbeatable in terms of toughness and offers unshaken strength to the wearer. Electricians and contractors working on high altitudes or difficult areas can rely on it as it never breaks down easily. The outstanding strength of the bag is due to the use of DuraTek 1250 fabric that is used in the construction of the belt. It also implicates that the belt can carry a considerable load easily and you don’t have to carry extra bags with you when going on a project.
To keep tools organized and easy to carry, the electrician’s tool pouch has 27 pockets altogether, 18 pockets and a tape chain on the right side, and 9 pockets on the left side. This helps you keep things in a well-mannered way and lets you do your job without any hassle.
Metal rivets and bar-tack stitching add value to the power of the bag while the even distribution of the pockets maintains a perfect balance between both sides. Ventilated padding is used to ensure the passage of air and keeps the body sweat-less. The contoured back of the belt minimizes the risks of back and shoulder pain and provides you great convenience when you carry it.
Though the bag is outstanding in all ways possible the price of the bag is a bit higher that makes it a hard option to choose for many buyers.
- Item Dimensions: 22.83x 14.24x 5.59 inches
- Item Weight: 5.94 pounds
- Material: DuraTek 1250 fabric
- Number of Pockets: 27
- Extremely durable and reliable belt
- Ample space due to 27 pockets
- Perfect for electricians and contractors
- Contoured back to prevent back and shoulder issues
- Expensive and not within the range of everyone
6. FASITE PTN012 Electrical Maintenance Tool Belt
It’s another best electrician tool belt that every professional should consider if comfort at the workplace is his top priority. It gives various reasons to add it to our list and the most prominent one is the design of the belt. The ergonomic design makes it super easy and highly comfortable to carry.
Due to the 600D polyester fabric, it’s an extremely light and sturdy belt that never damages easily. The fabric is waterproof so you don’t even have to worry about moisture and water and can easily work during rainy days.
Whether you work in the mountains or have to walk on the longer distances, the belt is very comfortable for everyone and for everyday usage. It never disappoints you when it comes to the pockets of the bag. Thirty pockets provide enough space for all sorts of tools while there is a separate space for the hammer.
The best thing about this belt is its compatibility with different sorts of tools other than electrician’s tools such as car tools, gardening tools, plumbing tools. No need to worry about the adjustment of the belt as it fits well with a big range of waist sizes, adjustable up to 48 inches.
If talking about the downsides of the belt, the tape measure is placed at the wrong side that causes difficulty to the access of the side pouches.
- Item Dimensions: 11.5x 3.9x 20.5 inches
- Item Weight: 1.5 pounds
- Number of Pockets: 32 pockets, 2 hammer loops, 1 steel measure
- Material: 600D Polyester Fabric
- Sturdy and powerful material
- Waterproof and scratch-resistant fabric
- Ample space due to 32 pockets
- Long-lasting material and high-quality belt
- Tape measure clip is placed at the wrong position
7. TradeGear Heavy Duty Electricians Tool Belt
You can also take hold of a premium quality belt that is sturdy and stable. It’s an electrician tool belt combo and bag so you can carry the tools you intend to take with you without facing any inconvenience.
There are 27 pockets in the Tradegear medium belt that keep tools hassle-free and well-organized. In addition to that, there are 2 heavy-duty pouches and D-ring attachment, and 4 tool belt with suspenders available in the belt so you can manage your tools effectively and keep wrenches, pliers, hammers, and grips separately.
The design of the belt delivers unbelievable comfort so you can carry it easily. Air-mesh foam padding and comfortable handles are placed to keep the belt sweat-free and prevent redness on the hands. You can also fold the velcro to ensure perfect fitting while the adjustment of the belt is the last thing you have to worry about.
Bar-tack stitching and the double layer of the bag provide extra protection to the bag and let you walk and climb with impressive ease. No damage and scratches make it the best companion at the workplace and it’s also the reason for our recommendation for the most demanding jobs.
The design, construction, and stitching of the belt prove it as the best tool belt for electricians, but there is also a minor downside of it, i.e. the absence of a tape holder. Other than that, it’s worth buying and long-lasting to carry.
- Item Dimensions: 22 x 14.5 x 5.5 inches
- Item weight: 4.74 pounds
- Number of pockets: 27
- Material: 600D nylon
- Powerful and sturdy material
- Convenient and air-mesh foam padding
- Multiple pockets and pouches
- Lightweight and easy to carry bag
- User-friendly carry handlers
- No tape holder is present in the belt that makes things a bit difficult
8. DEWALT DG5103 Small Durable Electricians Tool Belt
If you are looking for comfort, durability, and resilience all in one belt, then DEWALT DG5103 is the best option for you. The belt offers easy access to tools as the main pockets and smaller pockets are present at the front of the bag where you can place tools and get them whenever you need it.
The durability of the bag is non-questionable so you can enjoy it for a longer time period. Multiple storage options are another big reason for choosing this belt as you can keep small and bigger tools well-organized in web loops and sleeve pockets.
The electrician tool pouch is made of ballistic poly fabric that offers extreme resilience and strength which makes it a perfect fit for long-term usage. It also holds water-resistant property that protects tools from moisture and rust. This feature lets you work in rainy areas with great peace of mind.
There are separate pouches for bigger tools so you can hold the flashlight, hammer, and pliers. These pouches also help to keep things at their place and never let them mingle with each other. In this way, you can find tools easily and save your time and efforts during work.
Coming to the downside of the bag, the clips of the belt are not as sturdy as they should be. The chances of breakage are higher if you use it rashly.
- Item Dimensions: 9.3 x 3 x 7.5 inches
- Item Weight: 9.1 ounces
- Material: Ballistic poly fabric
- The number of pockets: 18
- Ideal for rainy places due to water repellent feature
- Durable and sturdy material
- Powerful and reliable belt
- Design of the allows you access tools easily
- Best for use in tough and demanding areas
- Clips are not sturdy and can be damaged easily
9. McGuire-Nicholas 526CC Brown Professional Electricians Pouch
In the list of best electrician’s tool pouches, the next item is also no less in its features. The pouch answers all needs of a professional so he can access tools easily and don’t face any issue during the work.
Multiple pocket loops are added to the pouch which provides enough space for tools. The belt is equally useful for both small and larger tools and the material adapts the shape of the tools due to the stretchable material.
It withstands excessive stress and can be used to carry heavier tools. The material of the belt is hard yet comfortable enough to carry effortlessly as it never causes any redness or rashes on the skin. Above all, the belt is lightweight and comes with comfortable padding to ensure maximum convenience. The added padded pouch also adds strength to the belt and prevents it from getting damaged.
It’s equipped with metal clip tape and has separate sections for small screws and nuts where they keep safe and easily accessible. Moreover, the belt doesn’t need excess maintenance and one can use it freely and without worrying about possible damage.
The only drawback of this bag is the initial stiffness that often offends the users. However, you must to not jump to the conclusions as the initial stiffness goes away very soon and you start enjoying its amazing benefits.
- Item Dimensions: 11.2 x 9.9 x 3.2 inches
- Item Weight: 16 ounces
- Material: Oil Tanned Leather
- Durability: Highly durable
- Powerful and sturdy electrician’s tool pouch
- Easy to wear and lightweight material
- Equipped with metal tape clip
- Convenient for various waist sizes and easily adjustable
- Multiple pockets and loops are present
- It’s difficult to use at the start due to the stiffness of the material
10. Occidental Leather 5500 Electricians Tool Pouch
A professional electrician always opts for the equipment which helps him to save time and effort. Occidental Leather 5500 tool is one of such things that allows you to keep things organized and you don’t have to waste time in search of a tool inside the belt. Different sized pockets are made to keep tools in separate compartments.
Rugged and sturdy leather construction prevents it from getting damaged and gives utmost peace of mind to users so they can concentrate on the work instead of worrying about the safety of the tools. Leather is known for its durability and resistance. That’s why the use of leather in this belt makes it your long-term companion.
Due to the sturdy material and high durability, it’s best for the heaviest and toughest tools and one can use it for every type of situation. Unlike many other electrician’s tool belts, it’s lightweight and weighs only 1.25 pounds. You can carry it easily and even walk for hours with it without getting any pain in the waist.
There are 15 pockets in the belt and every pocket is designed for a different tool. A separate compartment is made for the hammer to deliver the right support to the belt. Furthermore, the quick and easy release snap, easy adjustment, and long-lasting material are some other amazing belt features.
- Item Dimensions: 9.01 x 13 x 4 inches
- Item Weight: 1.25 ounces
- Material: Leather
- Pockets: 18
- It’s a sturdy and durable belt
- 15 pockets let you keep things well-organized
- Perfect for keeping hammers, screws, and tools
- Impressive design that manages tools properly
- It’s extra sturdy that sometimes makes things difficult to take in and take out
11. Klein Tools 5240 Maintenance Tool Pouch
There are so many things you will love about the pouch. It’s strong and powerful that you can use for several years. The pouch is great for professional electricians, contractors, and plumbers who can keep heavy and small tools in it without facing any issue.
It includes a tape thong and equipped with multiple pockets that allow keeping small tools such as splinters, screws, and basic essential tools. There is a great option for experts as well as DIY enthusiasts who want to work with great peace of mind and consistency.
The design of the belt gives quick access to tools and you can organize them with your own ease. Additionally, the convenient grab and go design answers to your all professional needs and it’s a reason for including the belt in the best electrician’s pouches.
Another amazing feature of the bag is the convenience it offers to the user and adjusts to every waist size. It also comes with a padded shoulder strap that gives more stability and power to the belt. Due to the powerful strap, you also get comfort while climbing up the ladders. Loops and pouches are highly professionally built and the pouch can be fit in any belt that has 2 inches of width.
Talking about the negative side of the belt, it’s not the right fit for heavy and large tools because it’s designed for small and compact tools.
- Item Dimensions: 11.5 x 5.25 x 1.8 inches
- Item Weight: 6.2 ounces
- Material: Polyester
- Pockets: 10
- Compact and lightweight pouch
- Reliable and sturdy material
- An excellent option for small and lightweight tools
- The material never damages easily
- Long-lasting and effective belt
- Convenient grab and go design
- It’s not a good option to carry larger and heavier tools
Get hands on some of the following electrician work belts that you might have not seen before.
Last update on 2023-06-09 / Affiliate links / Images from Amazon Product Advertising API
It may have taken just 10 or maybe 15 minutes to check out the list along with the buying guide. Note it down that the amount of time that you spent on reading this buying guide, will save you the extra bucks, energy, effort, and time.
By now, you have clearly made up your mind about which electrician belt you are going to buy. Furthermore, you read some of the most important tidbits about the quality and durability of the belts, the material in which they come, the convenience of using padded over non-padded, their durability and so much more. At the back of your mind, you are absolutely clear on two things: the first one, you are well-aware of your needs, the number of your tools, and how often you need to wear the tool belt while working.
And second, which price bracket suits you, and do you see the tool belt as an investment, or do you want it to become your companion at the workplace.
Leave a Reply